His WiFi Embarrassed me... We NEED to Fix it!

Initial Network Issues [00:00]

• James, despite his tech-savviness, had a poor home networking setup.
• His internet speeds were significantly lower than expected, with upload speeds being a fraction of previous performance.
• The existing setup included ISP-provided Wi-Fi and a secondary router, leading to multiple SSIDs and network congestion.

  "So why does your networking look like this?"

Omada Equipment Introduction [03:10]

• The solution involved a complete network overhaul using Omada's Soho-grade equipment.
• Components included an indoor Wi-Fi 7 access point, an indoor/outdoor Wi-Fi 7 access point, a PoE 2.5 gig switch with a 10 gig uplink, and the Omada Fusion Gateway 2.5.
• The Fusion Gateway acts as the central brain of the network and supports quad-WAN failover.

  "So what we're gonna do instead is we're gonna start from scratch with a Soho grade setup by Omada."

Network Topology and Gateway Setup [06:45]

• The existing network topology was explained, starting from the fiber ONT in the garage.
• James had used a second router to solve connectivity issues with his smart sauna lighting, resulting in four SSIDs.
• The Omada Fusion Gateway was connected, and the initial setup process via QR code was attempted, with some difficulty.

  "I was solving a different problem."

Switch and Indoor AP Installation [17:50]

• The Omada 8-port 2.5 gig switch with PoE was planned for installation.
• Due to space constraints and existing connections, the switch was relocated to an upstairs closet.
• Cable management and mounting the switch involved challenges, including tight spaces and the need for power solutions.

  "The next big piece is the appropriately named Omada 8 port 2.5 gig and 2 port 10 gig SFP plus smart switch with 8 ports PoE plus."

Outdoor AP Installation [31:00]

• The outdoor Wi-Fi 7 access point was to be installed in the backyard, aimed at the fire pit.
• The directional antenna configuration was chosen for optimal coverage in James' yard shape.
• The AP was mounted, and initial adoption and configuration were done while waiting for outdoor-rated cable.

  "So because James' yard is shaped like this, not like this, then we're going to go with the directional config."

Indoor AP Cable Run [37:00]

• Running the cable for the interior access point proved challenging, requiring careful maneuvering through tight spaces and a pilot hole.
• The process involved drilling through a wall and pulling the cable, with some difficulty due to existing tight runs.
• The team discussed the importance of using outdoor-rated cable for the exterior run.

  "I'm going to take this cat 6a outdoor rated stuff to rerun the run that we did earlier."

Final Configuration and Testing [45:00]

• Both indoor and outdoor access points were adopted into the Omada system.
• SSIDs were configured to match the previous setup, allowing smart devices to reconnect.
• Speed tests were conducted, showing significant improvements, with speeds reaching gigabit levels in the downstairs area.

  "Both of our APs are adopted right now. I went in and we've configured your access point names."

Conclusion and Offer [51:00]

• The network upgrade was successfully completed, providing gigabit speeds downstairs.
• Omada offered a promotion where customers could receive a free Fusion Gateway with a $399 purchase of Omada gear.
• The video concluded by referencing a previous video about fixing Natalie's Wi-Fi.

  "But the good news is we're done. We've got gigabit speeds downstairs. Hooray."